NuProsol is a Ready-To-Use mixture, providing freeze protection to -20°C. It has been especially formulated for use in Flat Panel and Evacuated Tube Solar Thermal Heating systems. And is able to operate efficiently at ≤170°C for prolonged periods and withstand temperatures of 200°C for short periods. It contains reversibly evaporisable inhibitors that are capable of withstanding stagnation temperatures of 300°C whilst protecting all metals used in Solar systems.
NuProSol also contains a high temperature rated polyacrylate, formulated to prevent sludge precipitation and scale formation. Thus promoting long operational life and high thermal efficiency.
NuProSol mixtures are readily biodegradable (90% over ten days) and will not remain in the environment or bio-accumulate.
NuProsol is a clear, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma.
Properties
Product: Ready-To-Use Non-Toxic High Temperature Rated Heat Transfer Fluid with Antifreeze Function. Based on Propylene Glycol blended with BS6580 proven Corrosion, Scale and Biological Inhibitors Density: 1.02 – 1.15 g/cm3 depending on inhibitors
Ph:7.5 – 10.5 depending on inhibitors
Boiling point: >100°C
Application
As per BSRIA guide AG 1/2001.1 all pipe-work systems should be clean and free from biological contamination prior to commissioning.
To minimise corrosion air* ingress and exposure should be minimized. A pressurised system is best. * Oxygen feeds the corrosion process which consumes inhibitors.
NuProSol is a Ready-To-Use Heat Transfer Fluid that will provide freeze protection down to -20°C.
Health & Safety: Please refer to the associated Safety Data Sheet.
Shelf Life: 3 years when stored in sealed containers out of direct sunlight.
Available in: 20litre containers
